Low PIM Terminations

Home > RF Terminations > Low PIM Loads

MECA Electronics is pleased to announce its latest Low PIM terminations / loads with industry leading -170dBc (typical) passive intermodulation! All of the terminations cover 698 – 2700 MHz frequency bands. Ideal for IDAS / ODAS, In-Building, base station, wireless infrastructure, 4G, and AWS applications. VSWR = 1.10:1 (typical). As always, MADE IN USA and 36-month warranty!

Low PIM Terminations
Made in USA

Click on Catalog Number to view spec sheet with outline drawing
Average Power (Watts)	Model	Catalog Number	Peak Power (Watts)	Freq. (GHz)	VSWR (Max)	PIM (Typ)	Length (in)	Diameter (in)	Weight	Add to RFQ
150		LPT150-NM	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
150		LPT150-NF	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
150		LPT150-DM	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
150		LPT150-DF	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
100		LPT100-DM	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
100		LPT100-DF	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
100		LPT100-NM-M01	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
100		LPT100-NF-M01	2500	0.698-2.7	1.20:1	-170 dBc	16.0	5.065	8.9 lb
100		LPT100-NM	2500	0.698-2.7	1.20:1	-170 dBc	12.0	4.0	8.57 lb
100		LPT100-NF	2500	0.698-2.7	1.20:1	-170 dBc	12.0	4.0	8.57 lb
75		LPT75-NM	2500	0.698-2.7	1.20:1	-170 dBc	8.50	3.0	3.18 lb
75		LPT75-NF	2500	0.698-2.7	1.20:1	-170 dBc	8.50	3.0	3.18 lb
50		LPT50-NM	2500	0.698-2.7	1.20:1	-170 dBc	8.50	3.0	3.18 lb
50		LPT50-NF	2500	0.698-2.7	1.20:1	-170 dBc	8.50	3.0	3.18 lb
30		LPT30-NM	2500	0.698-2.7	1.20:1	-155 dBc	5.50	2.25	1.13 lb
30		LPT30-NF	2500	0.698-2.7	1.20:1	-155 dBc	5.50	2.25	1.13 lb

Specifying Tip:
For best results when selecting a coaxial termination for a given connector style, make sure to consider the amount of power being absorbed and the acceptable level of reflection (VSWR) that can be tolerated over the operating frequency range.

Convenient Electrical Conversions
VSWR	1.05:1	1.10:1	1.15:1	1.20:1	1.25:1	1.30:1	1.35:1	1.40:1	1.50:1	2.00:1
Return Loss (-dB)	32.256	26.444	23.127	20.828	19.085	17.692	16.540	15.563	13.979	9.542
Voltage Reflection Coeff.	0.024	0.048	0.070	0.091	0.111	0.130	0.149	0.167	0.200	0.333
Match Efficiency (%)	99.94	99.97	99.51	99.17	98.77	98.30	97.78	97.22	96.00	88.89
Mismatch Loss (-dB)	0.003	0.010	0.021	0.036	0.054	0.075	0.097	0.122	0.177	0.512

Notes:
1. Passive Intermodulation Distortion:
    20 Watt Models = Less than -165 dBc, -170 dBc typical with 2 X 10 watt tones
    100 Watt Models = Less than -165 dBc, -170 dBc typical with 2 X 20 watt tones
2. 50 ohms nominal impedance is standard
3. Operating temperature from -55° C to +85° C
4. Rated power is at 25° C ambient temperature through natural air convection and derates linearly to
    0 watts @ +125° C

More Terminations

N-Male
N-Male RF Loads with average power ratings from 1 - 500 watts and available in frequencies from DC – 18.000 GHz.

N-Female
N-Female RF Loads with average power ratings from 2 - 500 watts and available in frequencies from DC – 12.400 GHz.

SMA-Male
SMA-Male RF Loads with average power ratings from 1 - 50 watts and available in frequencies from DC – 18.000 GHz.

SMA-Female
SMA-Female RF Loads with average power ratings from 5 - 50 watts and available in frequencies from DC – 12.400 GHz.

BNC-Female
BNC-Female RF Loads are rated for 2 and 5 watts average power and a frequency range from DC – 12.4 GHz.

TNC-Male
TNC-Male RF Loads are rated for 2w average power and a frequency range from DC – 6.000 GHz.

RP-TNC Male
RP-TNC Male Loads are rated for 2 watts average power and a frequency range from DC – 3.000 GHz.

QMA-Male
TQ1 series QMA male load cover all commercial wireless bands from DC - 3.0 GHz making them ideal for next generation BTS field upgrades.

Feed-Thru Terminations
Feed-Thru Terminations operate between 300-1000 MHz and are available off-the-shelf in N, SMA, BNC and TNC connector configurations.

7/16 DIN
7/16 DIN-Male termination models with power ratings of 1 - 100 watts and available in frequencies from DC – 6.0 GHz.

Product Categories

Top Selling Termination

V-Line RF loads are optimized for excellent performance across all wireless bands and their rugged construction makes them ideal for both base station and in-building wireless systems. Always available from STOCK - even in large quantities - for your next generation equipment deployments!

More »

Catalog Download

2013 Short
Form Catalog